Products
Daekyung Hydraulic Co., Ltd. has a wide range of products in the field of verticalinjection molding machines based on its accumulated technology over 40 years.
Parting Injection
- C frame vertical structure of clamping part, horizontal side injection part
- Due to the low height of the table for setting the mold, the efficiency and productivity of work can be increased.
- Cable insert and injection for various kinds of insert
- The structure of table is either a single type(MP, EP model) or a left and right direction slide type (MSP, ESP model).
- EP, ESP model have 4 column tie-bar structure.
- By the height-adjusting unit, it is easy to adjust the fitting line for the injection (Option)
- By the adoption of the safety guard for injection part, the resins at high temperature can be prevented from being leaked or discharged. (Option)
| Injection Units | Screw type | |
|---|---|---|
| Screw diameter | mm | |
| Injection pressure | kg/㎠ | |
| Shot weight (PS) | g | |
| Injection capacity | ㎤ | |
| Injection rate | ㎤/sec | |
| Plasticizing capacity | kg/hr | |
| Injection stroke | mm | |
| Nozzle stroke | mm | |
| Screw revolution | rpm | |
| Clamping Units | Clamping force | ton |
| Tie Bar interval | mm | |
| Clamping Stroke | mm | |
| Min. mold thickness | mm | |
| Max. opening stroke | mm | |
| Ejector force | ton | |
| Ejector stroke | mm | |
| Generals | Capacity of motor | kW |
| Capacity of servor(M) | kW | |
| Capacity of servor(S) | kW | |
| Capacity of servor(T) | kW | |
| Capacity of heater | kW | |
| Oil tank capacity | l | |
| Machine size | m | |
| Machine weight | ton | |
| DKV-35MP | ||
|---|---|---|
| O | A | B |
| 18 | 22 | 25 |
| 2052 | 2329 | 1803 |
| 25 | 38 | 49 |
| 28 | 42 | 54 |
| 48 | 55 | 66 |
| 8 | 9 | 20 |
| 110 | 110 | 110 |
| 180 | 180 | 180 |
| 0-220 | ||
| 35 | ||
| 450 x 320 | ||
| 220 | ||
| 170 | ||
| 390 | ||
| 1.7 | ||
| 45 | ||
| 22.6 | ||
| 18 | ||
| - | ||
| 4.6 | ||
| 140 | ||
| 2.1 x 1.1 x 2.0 | ||
| 3.2 | ||
| DKV-60M | ||
|---|---|---|
| O | A | B |
| 28 | 32 | 35 |
| 1688 | 1784 | 1491 |
| 75 | 98 | 117 |
| 83 | 109 | 130 |
| 71 | 78 | 83 |
| 31 | 40 | 48 |
| 135 | 135 | 135 |
| 240 | 240 | 240 |
| 0-200 | ||
| 60 | ||
| 520 x 350 | ||
| 220 | ||
| 200 | ||
| 420 | ||
| 2.7 | ||
| 60 | ||
| 24.2 | ||
| 18 | ||
| - | ||
| 6.2 | ||
| 180 | ||
| 2.2 x 1.2 x 2.1 | ||
| 3.9 | ||
※This specification is subjected to change for improvement without a notice.
