Injection Units | Screw type | |
---|---|---|
Screw diameter | mm | |
Injection pressure | kg/㎠ | |
Shot weight (PS) | g | |
Injection capacity | ㎤ | |
Injection rate | ㎤/sec | |
Plasticizing capacity | kg/hr | |
Injection stroke | mm | |
Nozzle stroke | mm | |
Screw revolution | rpm | |
Clamping Units | Clamping force | ton |
Tie Bar interval | mm | |
Clamping Stroke | mm | |
Min. mold thickness | mm | |
Max. opening stroke | mm | |
Ejector force | ton | |
Ejector stroke | mm | |
Generals | Capacity of motor | kW |
Capacity of servor(M) | kW | |
Capacity of servor(S) | kW | |
Capacity of servor(T) | kW | |
Capacity of heater | kW | |
Oil tank capacity | l | |
Machine size | m | |
Machine weight | ton |
10EV(플런저타입) | ||
---|---|---|
O | A | B |
22 | ||
30 | ||
150(80) | ||
10 | ||
250 | ||
100 | ||
13 | ||
120 | ||
2.25 | ||
1.5 | ||
830x1,070x1,970 | ||
1.0 |
15EV(플런저타입) | ||
---|---|---|
O | A | B |
25 | ||
40 | ||
200(100) | ||
15 | ||
250 | ||
100 | ||
50 | ||
140 | ||
3.75 | ||
2.5 | ||
850x1,120x2,000 | ||
1.2 |
15EV(스크류타입) | ||
---|---|---|
O | A | B |
25 | ||
45 | ||
80 | ||
15 | ||
250 | ||
150 | ||
50 | ||
190 | ||
5.5 | ||
2.5 | ||
900x1,180x2,300 | ||
1.5 |
※This specification is subjected to change for improvement without a notice.